Poly Printing Inks

Product Details:

We are the manufacturers and exporters of Flexographic and Rotogravure Poly Printing Inks. Rotogravure Solvent Based Poly Printing Inks are used for printing on carona treated polyethylene LDPE-HDPE Films for Shopping Bags,Garments and other packing.

Features:

• High Gloss
• High Strength
• Good Tape release
• Good Scuff resistance
• Good Crinkle resistance

Substrates:

• Can be printed on all types of Polyethylene, Polyproplyene, PVC, PT, MST
• For Polythylene and Polyproplyene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties

Printability:

• Excellent printability in Half Tone and good coverage in Full Tone
• Free from any printing defects such as streaking and scumming etc.
• Excellent rub and scratch resistance

Diluents:

• The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions.

For Flexo:

• The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions

For Gravure:

• Recommended diluents is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarder

Product Details:

Flexo Graphic/ Rotogravure Solvent Based Poly Printing Ink Concentrates with the support of well equipped manufacturing facility, we fabricate superior quality multigloss flexo / gravure poly inks. It is widely used for treated polyethylene, polypropylene, PVC and wide range of olefin substrates. Our range is manufactured using premium quality raw material and is characterized with excellent adhesion properties, high print density and excellent resistance to soap and alkali.

Features:

• Excellent Printability
• High Gloss
• High Strength
• Good Tape release
• Good Scuff resistance
• Good Crinkle resistance
• Sharp printability
• High quality half tone printing, Excellent dot reproduction, minimum dot gain
• Suitable for printing on treated Polyethylene & Polypropylene with treatment 38 dynes/cm. suitable for various press speeds
• After addition of Hardners @ 5% at the time of printing, good alkali resistance and soap resistance is obtained. Hence our A.R inks after addition of Hardners are suitable for detergent pack printing, spices and oil packing.

Recommended Application:

• For high quality, Tonal printing and fine line printing at high speed on Polyethylene Film

Substrates:

• Can be printed on all types of Polyethylene, Polyproplyene, PVC, PT, MST. For Polythylene and Polyproplyene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties

Printability:

• Excellent printability in Half Tone and good coverage in Full Tone
• Free from any printing defects such as streaking and scumming etc.
• Excellent rub and scratch resistance

Diluents:

• The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions

For Flexo:

• The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions

For Gravure:

• Recommended diluents is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarded

Colour Range:

• Full range of Pantone basic shades including Metallic and ARSR and Light Fast Shades

Product Details:

Alcohol Soluble Polyamide Resin based Poly Inks have marvelous solvent liberation, super glossiness, pigment wettability, marvelous glossiness and strong fine gel resistant and indoor temperature turn-frost, widely used in various printing fields.

Product Details:

Chemicoat is one of the leading manufacturer and exporter Metalized Poly Printing Ink which is well known for its glossy appearance.

Used for:

• Gift wrapping
• Twist wrappers
• Chewing gum wrappers
• Cosmetics and luxury products

Product Details:

Multi Gloss Flexographic/Rotogravure Solvent Based Poly Printing Ink for treated Polyethylene, Polypropylene PVC and wide range of Olefinic substrates. Chemicoat inks are designed for surface printing on Flexographic machine with anilox rollers.

Features:

• High Gloss
• High Strength
• Good Tape release
• Good Scuff resistance
• Good Crinkle resistance
• After addition of Hardners @ 5% at the time of printing, good alkali resistance and soap resistance is obtained. Hence our A.R inks after addition of Hardners are suitable for detergent pack printing, spices and oil packing.

Substrates:

• Can be printed on all types of Polyethylene, Polypropylene, PVC, PT, MST
• For Polyethylene and Polypropylene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties

Printability:

• Excellent printability in Half Tone and good coverage in Full Tone
• Free from any printing defects such as streaking and scumming etc.
• Excellent rub and scratch resistance

Diluents:

• The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions

For Flexo:

• The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions

For Gravure:

• Recommended diluent is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarder

Colour Range:

• Full range of Pantone basic shades including Metallic and ARSR and Light Fast Shades

Product Details:

We are a leading manufacturer and supplier of ARSR Poly Printing Inks.