Flexographic Printing Inks

Product Details:

We are the manufacturers and exporters of Flexographic and Rotogravure Poly Printing Inks. Flexographic Solvent Based Poly Printing Inks are used for printing on carona treated polyethylene LDPE-HDPE Films for Shopping Bags,Garments and other packing.

Features:

• High Gloss
• High Strength
• Good Tape release
• Good Scuff resistance
• Good Crinkle resistance

Substrates:

• Can be printed on all types of Polyethylene, Polyproplyene, PVC, PT, MST
• For Polythylene and Polyproplyene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties

Printability:

• Excellent printability in Half Tone and good coverage in Full Tone
• Free from any printing defects such as streaking and scumming etc.
• Excellent rub and scratch resistance

Diluents:

• The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions.

For Flexo:

• The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions

For Gravure:

• Recommended diluents is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarder

Product Details:

Flexographic Ink are high strength , high gloss polyamide base ink suitable for many types of Surfaces. Mainly used by carry bag industry. This ink can be applied for most of the application & film where Heat resistance, Lamination or Ar/Sr properties are not required.



Print Substrate

• Treated PP and PE, PVC, Cellophane, Metalized PVC/BOPP/PET,& Pearl BOPP

Key Product Feature

• High Gloss
• High print strength
• Excellent scuff and nail resistance
• Excellent wet and dry rub resistance
• Proves as the best adhesion to difficult surfaces
• Suitable for speed from 40m/m to 120m/m