Solvent Based Poly Printing Ink
Flexo Graphic/ Rotogravure Solvent Based Poly Printing Ink Concentrates. With the support of well equipped manufacturing facility, we fabricate superior quality multigloss flexo / gravure poly inks. It is widely used for treated polyethylene, polypropylene, PVC and wide range of olefin substrates. Our range is manufactured using premium quality raw material and is characterized with excellent adhesion properties, high print density and excellent resistance to soap and alkali.
|
Solvent Based Poly Industrial Printing Inks
Multi Gloss Flexographic/Rotogravure Solvent Based Poly Printing Inks for treated Polyethylene, Polyproplyene PVC and wide range of Olefinic substrates.
CHEMIFLEX ink Concentrates are designed for surface printing on Flexographic machine with anilox rollers for fine Tonal Printing at high speed on Polyethylene Films
Features: -
- Excellent Printability
- High Gloss
- High Strength
- Good Tape release
- Good Scuff resistance
- Good Crinkle resistance
- Sharp printability
- High quality half tone printing, Excellent dot reproduction, minimum dot gain.
- Suitable for printing on treated Polyethylene & Polypropylene with treatment 38 dynes/cm. suitable for various press speeds
After addition of Hardners @ 5% at the time of printing, good alkali resistance and soap resistance is obtained. Hence our A.R inks after addition of Hardners are suitable for detergent pack printing, spices and oil packing. Recommended Application:-
For high quality, Tonal printing and fine line printing at high speed on Polyethylene Film.
Substrates: -
Can be printed on all types of Polyethylene, Polyproplyene, PVC, PT, MST. For Polythylene and Polyproplyene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties.
Printability: -
- Excellent printability in Half Tone and good coverage in Full Tone.
- Free from any printing defects such as streaking and scumming etc.
- Excellent rub and scratch resistance.
Diluents: -
The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions.
For Flexo: -
The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions.
For Gravure: -
Recommended diluents is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarded.
Colour Range: -
- Full range of Pantone basic shades including Metallic and ARSR and Light Fast Shades.
The information in this data sheet has been carefully complied from our experience gained and detailed laboratory testing. However, the product performance and its suitability for the customers purpose depend on the particular condition of use and the material printed. We recommended that the customer satisfy themselves that each product meets their requirement in all respects before commencing a print run.
Send Enquiry | 
 |
|
Our Products
|
